1234Next

SP Flash Tool Errors and Solutions

Started By: bander Started On: 2018-5-16 14:33:06
7481 32
Usually we recommend to update via OTA, but sometime you may need to update via SP flash tool. It's ok to do that, but the problem is  you may meet some unexpected errors. We searched for the errors and would like to share it to you
Tips: there are lots of errors here and you can press "Ctrl+F" to search the name of error to get what you need.

Error 5054
Message:  BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)

Meaning: The files you're trying to flash do not belong to or are not compatible with the phone you're trying to flash them to

Solution:
  • Ensure you're using the correct files. If you're sure they are, then try factory reset before flashing again

Initialize scatter failed
Message: Error: Initialize scatter file failed. Please check the scatter file name you load is legal

Meaning: SP Flash tool doesn't accept the name format of your scatter file

Solution:
  • Ensure the scatter file wasn't renamed. If you're certain it wasn't, try a higher version of SP Flash tool

Error 8038
Message: Error 8038! Android download  pmt is ready and layout has been changed

Meaning: SP Flash tool is having trouble writing to certain partitions due to some incompatibility

Solution:
  • Factory reset then try flashing the files again using "Download" option
  • If "Download" doesnt work then do "firmware upgrade"
  • Download other ROM and retry flashing with the other scatter file.

Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash
  • Probably have the wrong driver installed.
  • Delete the sp flash tool folder then re-extract
  • Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
  • If that doesn't work, keep  holding  the volume up button just before connecting the phone to PC for flashing
  • Consider using the latest version of Sp Flash tool
  • Factory reset the phone before trying to flash the file(s) again

Error 5056
Message: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)

Meaning:  The size of a file is larger than the available / possible partition size

Solution:
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Try another stock ROM
  • Clear the phone's emmc

Error 4001
Message: S_FT_DA_NO_RESPONSE or Da didn't send response data to FlashTool!

Meaning: SP flash tool is having difficulty communicating with the device

Solution:  
  • Change the USB-port
  • Run SP flash tool as Admin
  • Ensure to install the correct drivers
  • Try another PC and USB cable
  • Ensure the phone is switched off with a charged battery inside when connecting to the PC for flashing

Error 4008
Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)

Meaning: SP Flash tool encountered an error while attempting to flash files

Solution:
  • Ensure the battery is in the phone and the phone is switched off before connecting for flashing
  • Try using a higher version of SP flash tool
  • Change the USB cable and port or PC
  • Factory reset and then select "Download" option in SP flash tool

Error 3149
Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)

Meaning: SP Flash tool was unable to flash files to the phone

Solution:
  • Ensure to run the latest version of SP flash tool as Administrator
  • Ensure the phone is switched off (with a well charged battery in it ) before connecting to PC for flashing
  • Try a different PC
  • Try a different ROM
  • Try a different USB cable
  • Try factory reset the phone first before flashing files to it

Error 3168
Message: BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)

Meaning: Sp flash tool believes there's a mismatch between the information provided in the scatter file and the phone's info.

Solution:
  • Ensure you're using the ROM for the exact phone model
  • Try a higher version of SP flash tool
  • Ensure to install the correct drivers for the phone on the PC

Error 2004
Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)

Meaning: There was an interruption in the communication between SP flash tool and the device

Solution:
  • Take out and reinsert the battery
  • Try using a different USB cable, port and PC
  • Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
  • Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing

USB device not recognized
Message: USB device not recognized prompt at system tray after connecting  the phone to PC

Meaning: The PC is having problems communicating with the phone (often due to interruption, hardware or driver problems)

Solution:
  • Uninstall the driver and re-install
  • Try a different USB cable, PC port or PC

Error 1013
Message: BROM ERROR:S_COM_PORT_OPEN Fail(1013)

Meaning: SP flash tool encountered an error while attempting to communicate with the phone via the target port

Solution:
  • Try using a different port on the PC
  • Try a different version of SP flash tool
  • Uninstall the driver and re-install
  • Ensure the phone is switched off with battery inside before connecting to the PC for flashing
  • Try using a different PC
  • Try changing the USB cord
  • Ensure the phone's USB port isn't damaged

Error 2020
Message: BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)

Meaning: SP flash tool encountered a problem moving the files to be flashed into the phone's internal SRAM

Solution:
  • Use the latest version of SP flash tool
  • In SP flash tool, navigate to Options > Option > Connection > Battery. Set it to "with battery".
  • Hold volume up button before connecting to the PC for flashing and release once flashing begins

Error 5007
Message: BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)

Meaning: You're trying to flash an item with an unspecified path (no file selected for the ticked item/box)

Solution:
  • Ensure the scatter file is in the same directory as the other file(s) to be flashed
  • Untick any item whose file you do not have or whose path is not specified; yet, is ticked / selected for flashing

Error 4010
Message: BROM ERROR : S_FT_FORMAT_FAIL

Meaning: The blocks map in the scatter file doesn't match the phone's partition sizes

Solution:
  • Try using the latest version of Sp flash tool
  • Try using another firmware for the exact phone model

Error 3182
Message: BROM ERROR: S_STORAGE_NOT_MATCH (3182)

Meaning: The ROM your're trying to flash is not compatible with the target device

Solution:
  • Download the ROM for the exact phone model you're trying to flash
  • Ensure to install VCOM drivers on the PC
  • Don't tick any box (after loading the scatter file) without a file path / whose corresponding file has not been automatically or manually loaded.

Error 6012
Message: BROM ERROR: S_SECURITY_SF_CODE_COMMAND_FORBIDDEN (6012), MSP ERROR CODE: 0X00

Meaning: The Download-Agent being used is incompatible with the phone

Solution:
  • Set Download-Agent to MTK_AllInOne_DA.bin

Error 1042
Message: BROM ERROR: S_TIMEOUT (1042)

Meaning: The flashing process took too long so SP flash tool encountered a timeout

Solution:
  • Try flashing one file at a time
  • Use the latest version of SP flash tool
  • Try using a different PC and USB cord

Error 2
Message: BROM ERROR: ?? (2)

Meaning: SP Flash tool was unable to communicate with the phone

Solution:
  • Try using a different PC (preferably Windows 7 or lower)
  • Install the correct VCOM drivers for your PC's OS and architecture (32 or 64 bit)
  • Try another USB cable

Error 2005
Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)

Meaning: The device attempted to power on before SP flash tool could flash files to it

Solution:
  • Ensure the battery is well charged
  • Take out and reinsert the battery
  • Try using a different USB cord, port and PC
  • Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
  • Try a different USB cord
  • Try a different port on the PC or another PC
  • Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
  • Do not hold any button when connecting to PC

Error 4058
Message: BROM ERROR: S_FT_GET_MEMORY_FAIL (4058)

Meaning: SP flash tool was unable to locate the partition you're trying to flash to

Solution:
  • Untick any item (box) with a blank or empty Location

Error 3178
Message: BROM_ERROR_S_STORAGE_NOT_MATCH (3178)

Meaning: The firmware you are trying to flash isnt compatible with your phone

Solution:
  • Try flashing another firmware for your exact phone model / variant

Error 8406
Message: SP FLASH TOOL ERROR (8406)

Meaning: There is some compatibility problem interrupting the flashing process

Solution:
  • Try flashing another firmware for your exact model
  • Update VCOM drivers for the device under Device manager

Error 1012
Message: BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)

Meaning: The version of SP flash tool you're using doesn't support the size(s) of the file(s) in the firmware / stock ROM.

Solution:
  • Use the latest version of SP flash tool

Error 3140
Message: BROM ERROR : S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED

Meaning: SP flash tool encountered an error flashing a selected file to a non-specified partition

Solution:
  • Try using the latest version of SP flash tool
  • Factory reset and then select "Download" in SP flash tool

Error 6047
Message: BROM ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL

Meaning: Hash (integrity) check of the images being flashed failed.

Solution:
  • Use higher SP Flash Tool version
  • Ensure to select the right Download-Agent
  • Navigate to Options > Option > Download and untick DA DLL All.....

Error 6010
Message: BROM ERROR: SP FLASHTOOL ERROR 6010 CODE DOWNLOAD FORBIDDEN

Meaning: The phone has a protected bootloader

Solution:
  • Untick Preloader and flash the rest

Error: 0xFDA
Message: BROM ERROR: S_FT_GET_MEMORY_FAIL (0xFDA)

Meaning: SP Flash tool encountered an error reading the phone's storage

Solution:
  • Try using a different USB Port, cable and PC

Error 0x13BE
Message: S_DL_GET_DRAM_SETTING_FAIL (0x13BE)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash

Error:?? (0x3)
Message: BROM ERROR:?? (0x3)

Meaning: SP Flash tool encountered an error maintaining a connection to the device during flashing

Solution
  • Reinstall the VCOM drivers
  • Try a different PC and USB cable

PRO_INFO: Failed to get PMT info
Message: PRO_INFO: Failed to get PMT info

Meaning: SP flash tool is having problems reading the phone

Solution
  • Try using a different PC and USB cable
  • Ensure the phone is switched off (with a charged battery inside) when you connect

Error 0x7D4
Message: BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL

Meaning: SP Flash tool encountered an error writing to the phone

Solution
  • Try changing the Download Agent setting
  • Try using a different USB cord, PC port and PC
  • Use the latest version of SP flash tool
  • Ensure the battery is well charged and the phone's USB port isn't faulty
  • Ensure the file name matches what's in the scatter file

Error 6124
Message: BROM ERROR: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR CODE: 0X00

Meaning: Wrong flash settings or firmware

Solution:
  • Ensure you set the correct Download-Agent in SP flash tool and are using a firmware for your exact model
  • Go to  Options > Option > Connection > USB Speed > Full Speed
  • Go to  Options > Option > Download > Untick DA DL All with Checksum

Error 0x8
Message: BROM ERROR: ?? (0x8)

Meaning:  The size of a file is larger than the available / possible partition size

Solution:
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Try another stock ROM
  • Clear the phone's emmc
  • Try using a different PC

Error OXFC0
Message: BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash
  • Probably have the wrong driver installed.
  • Delete the sp flash tool folder then re-extract
  • Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
  • If that doesn't work, keep  holding  the volume up button just before connecting the phone to PC for flashing
  • Consider using the latest version of Sp Flash tool
  • Factory reset the phone before trying to flash the file(s) again

Error 0X411
Message: BROM ERROR: S_CHKSUM_ERROR (0X411)

Meaning: There was a checksum error when flashing the firmware

Solution
  • Delete any file with checksum in its name from the firmware folder
  • Go to Options > Option > Download > Untick Da DL all with checksum

Error 0xFA1
Message: BROM ERROR : S_FT_DA_NO_RESPONSE (0xFA1)

Meaning: SP Flash tool encountered an error communicating with the device

Solution
  • Try using a different port, PC and USB cord
  • Ensure the phone is switched off with a charged battery inside
  • Do not hold any button when connecting for flashing
  • Ensure to install VCOM drivers


TOOL DL image Fail !
Message: TOOL DL image Fail !

Meaning: The firmware was flashed with Da DL all with Checksum disabled

Solution:
  • In SP flash tool, navigate to Options > Option > Download > Tick Da Dl all with checksum > Reflash the firmware

Please select one ROM at least before execution
Message: Please select one ROM at least before execution

Meaning: SP flash tool fails to recognize that there is an item ticked

Solution:
  • Select the scatter file again and untick all items you do not wish to flash one after the other. Don't use the checkbox beside "Name" in SP flash tool

Error 0xFC0
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash
  • Probably have the wrong driver installed.
  • Delete the sp flash tool folder then re-extract
  • Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
  • If that doesn't work, keep  holding  the volume up button just before connecting the phone to PC for flashing
  • Consider using the latest version of Sp Flash tool
  • Factory reset the phone before trying to flash the file(s) again

Error: 0xC0050003
Message: BROM ERROR: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)

Meaning: There was an interruption during writing to one or more partitions

Solution:
  • Repeat flashing with the latest version of SP Flash Tool
  • Try using a different Port, USB cord and PC

Error: 0xc002002A
Message: BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash
  • Probably have the wrong driver installed.
  • Delete the sp flash tool folder then re-extract
  • Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
  • If that doesn't work, keep  holding  the volume up button just before connecting the phone to PC for flashing
  • Consider using the latest version of Sp Flash tool
  • Factory reset the phone before trying to flash the file(s) again

Error 0XFA8
Message: BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)

Meaning: SP Flash tool encountered an error while attempting to flash files

Solution:
  • Ensure the battery is in the phone and the phone is switched off before connecting for flashing
  • Try using the latest version of SP flash tool
  • Change the USB cord and port or PC
  • Use the format option then download in SP flash tool
  • Try changing the Download Agent setting in SP Flash tool

Error 0x7D5
Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D5)

Meaning: The device attempted to power on before SP flash tool could flash files to it

Solution:
  • Ensure the battery is well charged
  • Take out and reinsert the battery
  • Try using a different USB cord, port and PC
  • Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
  • Try a different USB cord
  • Try a different port on the PC or another PC
  • Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
  • Do not hold any button when connecting to PC

Error 3179
Message: BROM ERROR : S_CHIP_TYPE_NOT_MATCH (3179)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash
  • Probably have the wrong driver installed.
  • Delete the sp flash tool folder then re-extract
  • Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
  • If that doesn't work, keep  holding the volume up button just before connecting the phone to PC for flashing
  • Consider using the latest version of Sp Flash tool
  • Factory reset the phone before trying to flash the file(s) again

Error 5073
Message: BROM ERROR : S_DL_READ_PT_FAIL (5073)

Meaning: SP flash tool encountered an error while trying to format the device

Solution:
  • Use "download only" under the download tab to flash the firmware


Storage type mismatch!
Message: scatter storage type is HW_STORAGE_EMMC
target storage type is HW_STORAGE_NAND

Meaning: There's a mismatch between the phone's storage type and that which the scatter file expects

Solution:
  • Try using a different firmware
  • Try a different version of SP Flash tool and run as Administrator

Error 8045
Message: No Valid Partition Management Table (PMT) for storage

Meaning: SP Flash tool encountered a problem identifying the device's partitions ahead of file writes

Solution:
  • Try Flashing the firmware using Download only

Error 1041
Message: BROM ERROR: S_CHKSUM_ERROR (1041)

Meaning: There was a checksum error when flashing the firmware

Solution
  • Delete any file with checksum in its name from the firmware folder
  • Go to Options > Option > Download > Untick Da DL all with checksum

0x00
Message: BROM ERROR: S_SECURITY_AC_REGION_NOT_FOUND_IN_SECROIMG (6128), MSP ERROR CODE: 0X00

Meaning:  The ROM contains a Checksum file but DL All With CheckSum was unticked

Solution:
  • Ensure to tick DL All With CheckSum under Options > Option > Download

BROM ERROR : S_SECURITY_SECRO_HASH_INCORRECT (6126) , MSP ERROE CODE : 0x00
Message: BROM ERROR : S_SECURITY_SECRO_HASH_INCORRECT (6126) , MSP ERROE CODE : 0x00

Meaning:  The ROM contains a Checksum file but DL All With CheckSum was unticked

Solution:
  • Ensure to tick DL All With CheckSum under Options > Option > Download

Error 0xC0050005
Message: ERROR STATUS_EXT_RAM_EXCEPTION (0xC0050005)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:

  • Ensure that the file(s) you're trying to flash are actually for your exact phone model
  • Ensure you tick the boxes for only the files present in the ROM you're about to flash

Error (3)
Message: BROM ERROR: ?? (3)

Meaning: There's a problem with the format of the scatter file or file(s) being flashed. An example is trying to flash .bin files using SP Flash Tool

Solution:
  • Check the scatter file and files you're about flashing to be sure they're not meant to be flashed using a different tool

Error 6104
Message:  BROM ERROR: S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE (6104), MSP ERROR CODE : 0X00

Meaning: Wrong flash settings or firmware

Solution:
  • Ensure you set the correct Download-Agent in SP flash tool and are using a firmware for your exact model
  • Go to  Options > Option > Connection > USB Speed > Full Speed
  • Go to  Options > Option > Download > Untick DA DL All with Checksum

Error 3183
Message: BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3183)

Meaning: Sp flash tool believes there's a mismatch between the information provided in the scatter file and the phone's info.

Solution:
  • Ensure you're using the ROM for the exact phone model
  • Try a higher version of SP flash tool
  • Ensure to install the correct drivers for the phone on the Pc

Error 0xC0060001
Message: BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0xC0060001)

Meaning: The device attempted to power on before SP flash tool could flash files to it

Solution:
  • Ensure the battery is well charged
  • Take out and reinsert the battery
  • Try using a different USB cord, port and PC
  • Right-click flash_tool.exe > Select Properties > Select Compatibility > Set to Windows XP Service Pack 3 > Click Apply > Click OK > Run SP flash tool as Administrator
  • Try a different USB cord
  • Try a different port on the PC or another PC
  • Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing
  • Do not hold any button when connecting to PC

PMT changed for the ROM
Message: PMT changed for the ROM; it must be downloaded

Meaning: The partition table about to be written (from the scatter file) is different from the phone's current partition table layout

Solution:
  • Ensure that the scatter file / files you're trying to flash are actually for your exact model
  • If you're trying to flash just a few files and not the firmware then you need to get the firmware to complement and then flash using download only
  • If you're trying to flash the full firmware then try using the Firmware Upgrade option first before download only

Error 6004
Message: ERROR: S_SECURITY_SLA_FAIL (6004), MSP ERROE CODE: 0X00

Meaning: The download agent isn't compatible with the device

Solution:
  • Try choosing a different Download Agent, version or tool
  • Ensure you're using the right Authentication file

Storage type mismatch!
Message:
scatter storage type is HW_STORAGE_EMMC
target storage type is HW_STORAGE_NONE

Meaning: There's a mismatch between the phone's storage type and that which the scatter file expects

Solution:
  • Try using latest SP Flash tool Version


Error 2035
Message: BROM ERROR: S_BROM_CMD_JUMP_DA_FAIL (2035)

Meaning: SP Flash tool encountered an error connecting to the device.

Solution
  • Ensure the battery is inserted and you're not holding any button when connecting to PC for flashing
  • Uninstall all Mediatek drivers then re-install VCOM drivers
  • Disable any modem manager or software which might be blocking ports on the PC
  • For Linux / Ubuntu users, make sure you installed libusb-dev then blacklist Ubuntu’s modem manager (because it controls port /dev/ttyACM0, which is disabling SP Flash Tool from running properly).

Error 0x412
Message: BROM ERROR: S_TIMEOUT (0X412)

Meaning SP Flash tool encountered a timeout when trying to flash (i.e flashing took too long to start or complete)

Solution
  • Ensure that files are actually loaded (with valid location) in SP flash tool (i.e location should not be empty)
  • Try flashing one file at a time
  • Use a higher version of SP Flash tool
  • Untick the large files or find smaller alternatives

Error 6029
Message: S_SECURITY_SEND_AUTH_FAIL (6029) , MSP ERROE CODE : 0x00

Meaning SP Flash tool can't authenticate the files you are trying to flash

Solution
  • Try another ROM / firmware from a different source

Error 0x93AF
Message: ROM[logo] checksum mismatch checksum_config[0x93af],checksum_val[0x94ae]

Meaning SP Flash tool encountered a checksum error

Solution
  • Open the checksum file using notepad++, search for 0x93af and replace with 0x94ae
  • Delete any checksum file in the rom

Error 5011
Message: S_DL_SCAT_INCORRECT_FORMAT (5011)

Meaning The scatter file has incorrect format. The scatter file has been badly created / modified

Solution
  • Download a different scatter file (one that doesn't pop the same incorrect scatter file error in SPft), open the two scatter files using Notepad++ and you will notice that the incorrect scatter file has its items slightly shifted to the left. Edit the incorrect scatter file to the same format arrangement as in the working scatter file.
  • After modifying the scatter file using the method above, ensure to use a recent version of SP flash tool e.g SP flash tool v5.1728
  • Download another ROM / firmware from a different source

Error 0xC52
Message: ERROR: S_DA_SDMMC_WRITE_FAILED (0XC52)

Meaning: SP Flash tool was unable to flash files to the phone

Solution:
  • Ensure to run the latest version of SP flash tool as Administrator
  • Format first then Download
  • Don't tick a box with an unspecified / empty file path
  • Ensure the phone is switched off (with a well charged battery in it ) before connecting to PC for flashing
  • Try a different PC
  • Try a different ROM
  • Try a different USB cord
  • Try formatting the phone first before flashing files to it

Error 0xC0050005
Message: BROM ERROR: STATUS_EXT_RAM_EXCEPTION (0xC0050005)

Meaning: There was an overlap error while trying to flash the firmware

Solution:
  • Ensure the firmware you're trying to flash is for your phone's variant

Error 0XFAA
Message: BROM ERROR: S_FT_FORMAT_FAIL (0XFAA)

Meaning: The source (firmware) doesn't properly match the target (phone)

Solution:
  • Try using a different firmware for your phone model
  • Ensure you're using the right tool to flash the firmware

Error 5072
Message: ERROR: S_DL_WRITE_PT_FAIL (5072)

Meaning: SP flash tool is having problems writing to one or more partitions

Solution
  • Try using a different PC and USB cord
  • Ensure the phone is switched off (with a charged battery inside) when you connect
  • Do not hold any button when connecting to PC for flashing

Error 0xC0070004
Message: ERROR: STATUS_DA_HASH_MISMATCH (0xC0070004)

Meaning: Hash (integrity) check of the images being flashed failed.

Solution:
  • Use SP Flash Tool V5.1516.00
  • Ensure to select the right Download-Agent
  • Navigate to Options > Option > Download and untick DA DLL All.






ollim
Honeycomb
2# 2018-5-16 15:09:45
Thanks! This is very useful information. Some of those error messages are so cryptic that they don't clearly tell us what is the problem. Now we no better. I saved the text to my Doogee folder so I can easily find it if and when I need it.
Reply

bander
administrator
3# 2018-5-16 15:38:44
ollim replied at 2018-5-16 15:09
Thanks! This is very useful information. Some of those error messages are so cryptic that they don't ...

it's great to hear that's helpful
Reply

chefconnor
Donut
4# 2018-5-22 01:28:10
This is not a flash_tool error, I got it in the unzip process:
Error 0x80010135: Path too long

I solved it by renaming the zip file to doog.zip
Reply

bander
administrator
5# 2018-5-23 16:31:42
chefconnor replied at 2018-5-22 01:28
This is not a flash_tool error, I got it in the unzip process:
Error 0x80010135: Path too long

thanks for sharing it
Reply

fb_zZM4O58
Donut
6# 2018-6-15 19:19:36
After installing a custom rom on my Doogee T5 with the FlashTool SP in Download mode and the installation was successful, the screen starts to flash with colors, and it does not let me see anything of the operating system. The smartphone works perfectly, i can hear the sounds of folders and applications opening. Any suggestions?
Reply


7# 2018-6-27 02:25:37
Muren1@icloud
Reply

fb_VdZT441
Donut
8# 2018-6-29 00:07:33
My X10 does not turn on and I have tried to flash it again with the SP Flash tool but I always get this error ERROR: STATUS_DA_HASH_MISMATCH (0xC0070004)
I have tried what it says in the forum about this error but it's still the same, what can I do?
Thank you
Reply

bander
administrator
9# 2018-6-29 14:30:34
fb_zZM4O58 replied at 2018-6-15 19:19
After installing a custom rom on my Doogee T5 with the FlashTool SP in Download mode and the install ...

it seems the ROM you used is not compatible, please try ROM in the forum
Reply

bander
administrator
10# 2018-6-29 14:33:09
fb_VdZT441 replied at 2018-6-29 00:07
My X10 does not turn on and I have tried to flash it again with the SP Flash tool but I always get t ...

hi, please use the special version SPflash tool: https://community.doogee.cc/forum.php?mod=viewthread&tid=4532
Reply
1234Next
Advanced Mode
B Color Image Link Quote Code Smilies |Upload

Points Rules

International