Edited by wangxiaoli at 2017-5-27 21:00 |
How to use SP flash tool to flash a stock rom on X5
This tutorial is to teach you how to use SP flash tool(Smart Phone flash tool) to flash a stock rom on x5.
To flash a rom,you will need:
-The mt6580 preloader drivers
Download latest version here: http://pan.baidu.com/s/1kU6Pq8vDownload latest version here.
-SP flash tool
-A stock rom
Download Doogee roms here: .https://mega.nz/#!wGJkiBqK!mkM-A ... aDZXMolIXBOJxIcLHKA
-A USB cable
Some of the steps may need you to try many times,please be patient!
Notelease do not use any Rom that is not specified for your device,otherwise it will brick your device.
1.Get necessary drivers and install them
Before this step, please confirm that the driver has been downloaded.
The package should contain files shown as below.
Double click Install.bat and then the drivers will be installed.
2.Start to flash a rom
Right click the tool - Run as administrator
Unzip the stock rom. Click Scatter loading button. Please make sure that you already open the Scatter file.
Then click the download.
Now connect your phone to PC via a USB cable,make sure the battery has been removed. If the battery is unremovable,just keep the phone shut down.
If the phone is detected correctly,the status bar will run by itself like below, wait until the peocess is done.
This means you have flashed the stock rom successfully.Congratulations!
Next, I will explain how to flash a recovery.